Copyright © 2016 | Gunjan Paints Limited, All rights reserved.
| DESCRIPTION | A two pack epoxy polyamide cured coating with good performance in marine and industrial environments. Good resistance to water and mild chemicals. |
| RECOMMANDED USE | For application on Structural Steel, Pipelines, etc. subjected to aggressive environment. Suitable for application on columns and structures of fertilizer plants, chemical units . |
| TYPE | Two pack, cured with polyamide. |
| MIXING RATIO | Base : Catalyst : 3 : 1 by volume. |
| MATURATION TIME | 20 Minutes |
| POT LIFE OF MIXTURE | 5 – 6 hrs |
| FINISH | Glossy, Semi Glossy and Matt. |
| COLOUR | Grey or As per your requirement. |
| COVERING CAPACITY | 9-11 Sq.Mt/Ltr. |
| RECOMMENDED DFT | 30 - 40 microns per coat |
| VOLUME SOLIDS % | Approx. 37% |
| DRYING TIME | Touch – 1 hr. Hard – Overnight |
| OVER COATING INTERVAL | Min. Overnight |
| FLASH POINT | Above 25C |
| RECOMMENDED THINNER | EPOXY Thinner |
| METHOD OF APPLICATION | Brush and Spray (3.00 KG PRESSUR & 1.5 TO 2.00 FUTT DISTANT) |
| DIRECTION FOR USE | Surface should be clean, free rust, grease, oil, moisture and lose flakes. Stir the contents before use. Mix base and hardener properly in the recommend ratio. Allow mixture to mature for 20 minutes before applying by brush or spray. Use necessary recommend thinner if required. |
Copyright © 2016 | Gunjan Paints Limited, All rights reserved.
